Plasson 110mm by 63mm reducing sets

Available in kit or assembled form - the reducing set allows reductions from 110mm to 63mm without the need for victaulic or threaded reducers.  The reduction is achieved within the nut of the 110mm compression coupling and has the same pressure rating as the fitting - PN16.  The reducers can be purchased assembled to produce:

• 110 by 63 reducing tees
• 110 by 63 reducing coupling
• AS4087 PN16 DN100 (table D) Flanged reducing coupling to 63mm poly

or as a seperate kit to be installed into existing 110mm Plasson compressing fittings.

Reducing sets are available in sizes 20mm - 110m, making a reduction of 110mm to 20mm possible within the length of the 110mm Plasson nut.

For more information on this range of fittings click here.

Plasson - Beware of Imitations!

There is only one fitting used and proven in the Australian mining industry for over 30 years - Plasson.  So when you specify Plasson fittings for your mining requirements ensure you are getting the brand you asked for.  Plasson fittings will always:

• Have the Plasson brand on the body and nuts of the fitting
• Be supplied with black nuts (Plasson fittings with white nuts are designed for European conditions and are not suitable for use in Australian conditions).

If you are concerened you have been supplied with and an inferior copy click here for more information about identifying the original and best.