NO TOOLS HASSLES LEAKS BLOW-OUTS WITH PLASSON RURAL

RURAL COMPRESSIONRURAL COMPRESSIONRURAL COMPRESSION



PLASSON GOES ON AND STAYS ON AND ON

CHOOSE PLASSON RURAL COMPRESSION FITTINGS FOR RELIABILITY AND PEACE-OF-MIND



PLASSON rural compression fittings go on the pipe and seal watertight instantly.  It isn’t magic, just the result of some clever engineering.

Instant Sealing

PLASSON rural compression fittings go on the pipe and seal watertight instantly. Our captive O-ring creates a seal before you even tighten the nut. And you don’t need any special tools to install our fittings.  Just do the nuts up firmly by hand and the job is done.

Flexible

Our rural fittings can be converted to connect to metric poly (blue line), PVC, steel, and copper pipes.

Long Body

The long body on PLASSON fittings ensures the seal will not be affected by bending loads or ground movement.

Pull-out Resistant

All PLASSON fittings exceed the pull-out requirements of Australian Standards making PLASSON ideal for submersible bore jobs.

see how to install PLASSON rural poly pipe joiners in three easy steps

PLASSON rural compression fittings seal watertight as soon as they go on the pipe.  This simple idea is seriously smart which describes PLASSON to a tee!

All compression fittings seal using O-rings.  PLASSON is a little different though.  Our compression fittings have captive O-rings. There is a groove machined into the fitting which holds the O-rings in place so they can’t be lost, damaged or contaminated.

This also keeps the seal in the optimum position so as soon as our rural poly pipe joiners go on the pipe, the connection is watertight.

With PLASSON, you only tighten the nut to prevent pipe blow-outs!

PLASSON RURAL FITTINGS SEAL WATER-TIGHT THE MOMENT THEY GO ON THE PIPE

Rural solutions that are smart, adaptable and reliable

Because not everyone uses the same size pipe, our red barbed inserts are designed to allow installation on all common rural pipe types and diameters.

PLASSON also have clever Conversion Kits to make it easy to switch between metric, rural, copper and PVC pipe.

With PLASSON, you don’t need to changing the whole fitting. A Conversion Kit allows you to repurpose the fittings you already have on hand.

There are also options to adapt fittings for different pipe materials, pipe sizes and to work as a threaded connection.

Again, choose PLASSON and you don’t need to buy a whole new fitting when conditions and needs change – Adaptor Kits let you adapt fittings you already have to suit the job at hand.

The team at PLASSON are driven by the challenge to engineer the perfect fittings and constantly fine-tune to produce solutions that get the job done quick smart.